Durajoint Waterstop Durajoint Forming Durajoint Rebar Supports Durajoint Mesh Supports Durajoint Transportation Durajoint Prestressed Durajoint Specialty Products

Waterstops

Durajoint ®
Concrete Accessories
10426 Industrial Drive
Garrettsville, Ohio 44231

Toll Free:
1-888-833-8308

Direct:
1-330-527-4308

Technical Assistance:
1-888-833-8308

Fax:
1-330-527-2440

Home / Contact / Msds / About Us


EXPAND-Tite

EXPAND-Tite waterstop is a flexible concrete construction joint waterstop that is easy to install in non-moving joints.

EXPAND-Tite expands in a controlled fashion when exposed to moisture and will not expand beyond a point where the hydration process reduces the effectiveness of the waterstop.

When installing EXPAND-Tite the concrete surface needs to be dry and free of contamination. EXPAND-Tite Primer (03090176) is also recommended before the placement of the waterstop.

Applications: -Tunnels
-Retaining Walls
-Pipe
-Manholes
-Foundations
-Parking Garages
-Box Culverts
-Utility/Burial Vaults -
-Storage Tanks|
-Manure Pits
-Septic Tanks

Note: A minimum of two (2) inches of concrete clear cover must separate EXPAND-Tite from the face of the concrete.

EXPAND-Tite is available in three sizes:

Part#
Product Name
Dimensions
Feet Per Carton
03085173
EXP100
Expand-Tite 100
3/4" x 1" x 16'8" a roll

(6 Rolls per Carton)

100 Linear Feet per carton

03085174
EXP200
Expand-Tite 200
3/8"x 3/4" x 25' a roll

(8 Rolls per Carton)

200 Linear Feet per carton

03085175
EXP150T
Expand-Tite 150
1/2" x 1/4" x 16'8" a roll

(5 Rolls per Carton)

84 Linear Feet Per Carton

Description
Method
EXPAND-Tite
Color
Black
Specific Gravity
ASTM D-71
1.35 ± 5
Hydrocarbon Content
ASTM D-4
47% min
Volatile Matter
ASTM D-6
1% max
Penetration, cone @77°F, 150 gm; 5 sec.
ASTM D-217
40±5
Application Temperature
-10° -125° F
(-22° -52° C)
Service Temperature
-30° - 180° F
(-34° - 82° C)


LIMITED WARRANTY
This information is presented in good faith, but we cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the application of this information or the safety and suitability of our products, either alone or in the combination with other products. Users are advised to make their own tests to determine the safety and suitability of each such product or product combinations for their own purposes. It is the users' responsibility to satisfy himself as to the suitability and completeness of such information for this own particular use. We sell this product without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of this product, whether used alone or in combination with other products.